Maximizing deviation method for multiple attribute decision making under q-rung orthopair fuzzy environment

Because of the uncertainty and subjectivity of decision makers in the complex decision-making environment, the evaluation information of alternatives given by decision makers is often fuzzy and uncertain. As a generalization of intuitionistic fuzzy set (IFSs) and Pythagoras fuzzy set (PFSs), q-rung orthopair fuzzy set (q-ROFS) is more suitable for expressing fuzzy and uncertain information. But, in actual multiple attribute decision making (MADM) problems, the weights of DMs and attributes are always completely unknown or partly known, to date, the maximizing deviation method is a good tool to deal with such issues. Thus, combine the q-ROFS and conventional maximizing deviation method, we will study the maximizing deviation method under q-ROFSs and q-RIVOFSs in this paper. Firstly, we briefly introduce the basic concept of q-rung orthopair fuzzy sets (q-ROFSs) and q-rung interval-valued orthopair fuzzy sets (q-RIVOFSs). Then, combine the maximizing deviation method with q-rung orthopair fuzzy information, we establish two new decision making models. On this basis, the proposed models are applied to MADM problems with q-rung orthopair fuzzy information. Compared with existing methods, the effectiveness and superiority of the new model are analyzed. This method can effectively solve the MADM problem whose decision information is represented by q-rung orthopair fuzzy numbers (q-ROFNs) and whose attributes are incomplete.     

压电材料中的共线非等长多裂纹问题

建立了横观各向同性压电材料中的共线非等长多裂纹模型。将裂纹模拟为连续分布的广义位错,推导了单点广义位错的格林函数,并基于此得到了共线非等长多裂纹的奇异积分方程组,最后由数值计算给出了裂纹尖端的能量释放率。对奇异积分方程组的退化分析和对称条件下的数值结果的讨论,验证了本文结果的正确性。研究表明:当共线裂纹间距小于裂纹长度时,裂纹尖端场存在显著的干涉效应;裂纹越长,干涉效应越显著;电载荷系数越大,能量释放率也越大;相对于外侧尖端而言,共线裂纹内侧尖端对电载荷系数更为敏感。     

压电界面电极的应力强度因子

建立了压电界面电极的力学模型，利用有限傅里叶变换方法将相应的力电耦合问题描述为奇异积分方程，并得到了界面应力及其强度因子的解析解。讨论了结构几何参数对应力强度因子的影响。基于强度设计的观点得到两方面的结论：一是界面中心电极优于偏置电极；二是界面长度的最优值为中心电极长度的2倍。     

Analysis for the residual prestress of composite barrel for railgun with tension winding

Based on the elastic theory of cylindrical shells and the theory of composite laminates, a prediction model for the residual prestress of the simplified round composite barrel for railgun is established. Only the fibre pretension is considered in this model. A three dimensional numerical simulation for the residual prestress in the railgun barrel is carried out, by combining the temperature differential method with the element birth and death technology. The results obtained by the two methods are compared. It reveals that the distribution trends of residual prestress are consistent. And the difference for residual prestress in the filament wound composite housing of barrel is relatively small. The same finite element method is used to analysis the residual prestress in the non-simplified composite barrels for railgun, which are under different control modes of winding tension. The results mean that the residual prestress in barrel will increase while the taper coefficient for winding is decreasing. Therefore, the sealing performance in bore is improved, but the strength of the filament wound composite housing drops. In addition, the axial and circumferential residual prestress in the filament wound composite housing with constant torque winding are close to the ones in iso-stress design for barrel.     

B4C/Al复合板中应力波行为分析（Ⅰ）

依据7.62mm穿甲燃烧弹与B4C,Al板的物理和力学特性,提出弹、板的力学模型;在此基础上,给出弹板碰撞后B4C/Al复合板的弹性动力学方程,建立应力波的传播模型,讨论了应力波传播时复合板的力学行为,最后确定了复合板承受的初始冲击应力。理论分析表明：一维应变条件的B4C和Al板的弹性极限高于一维应力条件下的值;弹、板间的作用力服从指数衰减规律;B4C板的初始应力高于430MPa时,应力波的作用使Al板在卸载过程中发生反向屈服。     

利用过阻尼电路合成高压方波脉冲

在过阻尼RLC电路分时放电的基础上,提出新型高压方波脉冲产生方法。理论分析表明:过阻尼RLC电路产生的双指数电压波与脉冲形成线产生的方形电压波具有类似的上升沿和平顶。电路模拟表明:通过人工过零技术可以对双指数电压波进行截尾,从而形成完整的高压方波脉冲。建立了原理验证性样机,由两组RLC电路构成,每组电路包含一台脉冲电容器和一只三电极场畸变气体开关,两组电路共用一个上升沿调节电感。实验证明:样机可以在电阻负载上输出幅值为17 kV、平顶宽度为330 ns～5.8μs、上升沿为100～350 ns的单极性高压方波脉冲。该方法适应性强,对负载变化不敏感,同时具有良好的可调节性,方波上升沿、平顶宽度连续独立可调。     

Reactor-grade plutonium and nuclear weapons: ending the debate

The claim that reactor-grade plutonium cannot or will not be used to produce nuclear weapons has been used to justify non-nuclear-weapon states’ large stockpiles of plutonium that has been separated from highly radioactive spent fuel. However, by using reduced-mass plutonium cores, it is possible to manufacture reliable nuclear weapons with reactor-grade plutonium. These weapons can have the same design, size, weight, and predetonation probability as weapons using weapon-grade plutonium and would require no special cooling. The increased radiation from reactor-grade plutonium could be easily managed by shielding and operational procedures. Weapons using plutonium routinely produced by pressurized-water reactors could have a lethal area between 40 percent and 75 percent that of weapons using weapon-grade plutonium. In the past, both Sweden and Pakistan considered using reactor-grade plutonium to produce nuclear weapons, and India may be using reactor-grade plutonium in its arsenal today. Despite claims to the contrary, the United States used what was truly reactor-grade plutonium in a successful nuclear test in 1962. The capability of reactor-grade plutonium to produce highly destructive nuclear weapons leads to the conclusion that the separation of plutonium, plutonium stockpiling, and the use of plutonium-based fuels must be phased out and banned.     

Coating processes towards selective laser sintering of energetic material composites

This research aims to contribute to the safe methodology for additive manufacturing (AM) of energetic materials. Coating formulation processes were investigated and evaluated to find a suitable method that may enable selective laser sintering (SLS) as the safe method for fabrication of high explosive (HE) compositions. For safety and convenience reasons, the concept demonstration was conducted using inert explosive simulants with properties quasi-similar to the real HE. Coating processes for simulant RDX-based microparticles by means of PCL and 3,4,5-trimethoxybenzaldehyde (as TNT simulant) are reported. These processes were evaluated for uniformity of coating the HE inert simulant particles with binder materials to facilitate the SLS as the adequate binding and fabrication method. Suspension system and single emulsion methods gave required particle near spherical morphology, size and uniform coating. The suspension process appears to be suitable for the SLS of HE mocks and potential formulation methods for active HE composites. The density is estimated to be comparable with the current HE compositions and plastic bonded explosives (PBXs) such as C4 and PE4, produced from traditional methods. The formulation method developed and understanding of the science behind the processes paves the way toward safe SLS of the active HE compositions and may open avenues for further research and development of munitions of the future.     

低散热柴油机研究综述

低散热柴油机是对燃烧室等主要受热零部件采取隔热措施处理的发动机。发动机工作时,通过燃烧室表面向冷却水的传热减少,可以显著减小坦克发动机冷却系统的整体尺寸。介绍了低散热柴油机的研究和发展情况,分析了隔热技术研究存在的问题,提出了坦克装甲车辆柴油机应用隔热技术研究的方向,指出隔热技术应用于柴油机成功与否的关键是隔热部件或涂层材料的可靠性,应用隔热技术后,应该进行燃烧系统优化及车辆冷却系统的整体性能的研究。     

对央视新址北配楼火灾的思考

从央视新址北配楼火灾着手，通过分析火灾的特点，从加强烟花爆竹安全管理及宣传教育、建筑外部装修消防安全、改进对建筑工程及施工现场的消防监督工作和对高层建筑限高、加强“六熟悉”方面提出了防止类似高层建筑火灾发生的措施。